Adding a printer to Cura

So Make It currently has 3 different Lulzbot printers in various configurations. This page details how to set up Cura for each

For most of the machines for direct connection you need to use the lastest Cura Lulzbot edition (currently 3.6.20) and in the Settings menu select Printer -> Add Printer...

Taz 3

The Taz 3 is fitted with a flexystruder for printing flexible materials such as ninjaflex. Use Cura 21.60 and add a machine from the Machine menu select Add New Machine then select the following options in the add machine wizard:

  • Lulzbot TAZ 4 or 5
  • Modified Lulzbot TAZ 4 or 5
  • PEI
  • v1 (Budaschnozzle)
  • Flexystruder v1
  • SKIP UPGRADE (Are you sure? - Yes)

Taz 6

The Taz 6 is stock so use the following options

  • Lulzbot TAZ 6
  • Single Extruder

Lulzbot Mini (standard)

For Somakeit Mini 1, 2 3 and 4 use stock settings

  • Lulzbot Mini
  • Single Extruder
  • No Graphical LCD

Lulzbot Mini (flexystruder)

For Somakeit Mini 5 with a flexystruder

  • Lulzbot Mini
  • Flexystruder v2
  • No Graphical LCD
This article is issued from Old-wiki. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.